2 Switch Valves, Drip Irrigation Fittings Kit, 8 Elbows and 8 End Cap Plugs, 8 Tees, Irrigation Water Hose Connector, 8 Couplings, Irrigation Barbed Connectors for 1/2" Tubing 34 Piece#adSANXIA #ad - Great value kit: the irrigation fittings kit includes 2 switch valves, 8 tees, 8 elbows, 8 couplings, 8 End Cap Plugs. Fits most tubing 1/2 inch: these 16mm drip irrigation fittings fit most brands of 1/2 inch irrigation tubing 16mm.
520-. 540" id. If this item don't fit your tube, we will refund for you. Easy to install: irrigation hose connector is safe and simple to install without glue, tools, or clamps.
Save time and build your complete drip irrigation system at once. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Durable material: our drip irrigation barbed connectors are made of environmentally friendly anti-aging UV resistant high-impact plastic. Ideal for garden greenhouse, lawn, patio, flower Bed, etc.
B&A 14 Pieces Drip Irrigation Tubing Connector 1/2 Inch Universal Adapter Drip Tubing Fittings Connector Barbed Locking Fitting Fits All Brands 16-17mm Drip Tape and Tubing#adB&A #ad - Safe and leak-free: the leak-free design allows you to connect and configure the drip irrigation tube to the desired layout and allow you to create custom layouts for your planting area. The twist lock adds additional fixing to the tubing to ensure a reliable connection every time.
Wide range of application: our irrigation joints are suitable for many occasions, such as agricultural irrigation, etc. Greenhouse gardening, gardens, suitable for most 16-17 mm drip irrigation pipes.
The package includes: you will get 2 pieces of elbow joints, 4 pieces of coupling adapters and 4 pieces of end plug connectors, 2 pieces of 3-Way Tee adapters, 2 pieces of shut off valves connectors, the number is enough for your daily use and replacement. Durable materials: these drip irrigation connectors are made of sturdy plastic, so they have a long service life, and can work continuously for many days, no leakage, which is convenient and practical.
6 Tees, 2 Elbows, 6 Couplings, 6 End Cap Plugs, 20 Piece Set, Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems, Habitech Irrigation Fittings Kit for 1/2" Tubing#adHabitech #ad - Compatible with many types of rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.
Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures.
These 17mm barbed fittings work with half inch drip tubing from 0560 to 0600 inside Diameter ID. Keep extra parts handy for irrigation repair or expansion. Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic.
8 Per Bag with Instruction, MIXC Barbed Tee 1/2 inch to 1/4 inch Irrigation Tube Anti-Drop Premiun Quality Fitting fits 13mm ID/ 4mm ID#adMIXC #ad - For use with drip distribution Tubing, Drip Bubbler Tubing and emitter line. Press the barb tee into tubing. Lock the tube with srew caps. Anti-drop design: secure and easy installation.
5. One Stop Outdoor#ad
Barbed Connectors For Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems, 5 Couplings, Irrigation Fittings Kit for 1/2" Tubing 20 PIECE SET, 5 Tees, 5 Elbows, 5 End Cap Figure 8 Plugs#adOne Stop Outdoor #ad - If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Secure and easy installation without glue, tools, or clamps. Fits all major brands of tubing 1/2", 16mm - Approximately.
|Brand||One Stop Outdoor #ad|
|Manufacturer||One Stop Outdoor #ad|
Toro 1/2 or 5/8 Tubing x 3/4" FHT, Dig, Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter, Reusable Connector Fittings for Most Rain Bird, Orbit#adHabitech #ad - Durable construction provides years of reliable use. Just insert and twist, no special tools needed. Large fitting ID means less flow restriction. Please make sure your tubing specifications fall within these ranges for the proper fit.
Reusable & long lasting: unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal.
Stress-free fit: our irrigation faucet adapter connection works with the widest range of half inch tubing, from. 520 to. 620" inside diamater, Dig,. 620 to. 710” outside Diameter and. 045 to. 055 wall Thickness. Zero leaks: barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure.
Barded Connectors for Drip or Sprinkler Systems, Arfun Drip Irrigation Fittings Kit 17mm for 1/2" Tubing .600" ID, 28 Pieces Set, 10 Couplings, 6 Tees, 6 Elbows and 6 Tubing End Closure#adArfun #ad - These 17mm irrigation fittings work with most of 1/2" drip irrigation tubing 17mm. 560-. 600" id, orbit, compatible with many types of Rainbird, Dig and Toro half inch tubing.
Easy to install without glue, tools, or clamps. Upgrade great value: includes 10 Couplings, 6 Tees, 6 Elbows and 6 Tubing End Closure. Ideal for use with garden greenhouse, flower bed, patio and agricultural watering applications.
Drip Irrigation 90 Degree Connector Fitting Fits Drip Tubing Size .700.704 & .690 OD, 25-Pack, 1/2" Compression Elbow#adDIG #ad - Recommended operating pressure: 15 to 35 PSI 25 PSI pressure regulator is recommended. Maximum operating pressure: up to 60 PSI. Made with high-impact UV-resistant plastic. Fits all polyethylene drip tubing with. 690 od,. 700 od and. 704 od. Secure and easy installation without glue or clamps.
9. One Stop Outdoor#ad
Barbed Connectors Fits Most Brands, Rain Bird 16mm .520 ID and Compatible Drip or Sprinkler Systems Elbow 20-Pack, 20-Pack, Irrigation Fittings Elbow Corner 90 for 1/2" Drip Tubing#adOne Stop Outdoor #ad - Simply push the tubing firmly over the barbs for a very tight fit that won't leak. 20-piece elbows - perfect for making exact corners or 90 degree turns. High impact Plastic Construction.
Please note* - to prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. Simple to install. These fittings are designed to fit 1/2" Inch, 16mm drip tubing. 520 id, if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.
|Brand||One Stop Outdoor #ad|
|Manufacturer||One Stop Outdoor #ad|
Jayee 25 Pack Drip Irrigation Barbed Tee Fittings 17mm for 1/2" Drip Hose0.600”ID ，Sprinkler Tubing Connector for Drip System#adJayee #ad - Tips: heat the end of hose to help it slide on this coupling. These 17mm barbed tees are compatible with Rainbird, Orbit and other 1/2 inch drip tubing. Durable plastic material：made of high-impact and high-strength plastic material, this 1/2 inch barbed tee assures more durable life.
Easy installation：simply push this tubing connector can connect it with tubing firmly and its barbed design makes NO LEAKS possible.