Top 10 1/2 Inch Irrigation Tubing Fittings – Garden Hose Parts & Connectors

As an Amazon Associate I earn from qualifying purchases.

1. Habitech

#ad

Reusable Connector Fittings for Most Rain Bird, Toro 1/2 or 5/8 Tubing x 3/4" FHT, Dig, Orbit, Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter

#ad
Habitech #ad - Simply loosen nut to remove tubing. Reusable & long lasting: unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. No slippage or leaking, even under high pressure. Stress-free fit: our irrigation faucet adapter connection works with the widest range of half inch tubing,.

620 to. 710” outside diameter and. 045 to. 055 wall Thickness. Please make sure your tubing specifications fall within these ranges for the proper fit. Each swivel irrigation fitting includes a pre-installed rubber washer to guarantee a water-tight seal. Just insert and twist, no special tools needed. Easy to use: easily connect 1/2" drip irrigation tubing to any standard 3/4" faucet, hose bibb or garden hose. Durable construction provides years of reliable use.

Patented locking technology: quickly revolutionizing irrigation fitting expectations worldwide, the patented locking technology works great under high pressures and around heavy foot traffic. Zero leaks: barb design ensures tubing will not slip out or blow off at high pressure and temperature. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on. Compatible with many models of Rainbird, from.
BrandHabitech #ad
ManufacturerHabitech #ad
Height1.25 Inches
Length2.5 Inches
Width1.25 Inches
Part Number4336485431

2. SANXIA

#ad

8 Couplings, Irrigation Water Hose Connector, Drip Irrigation Fittings Kit, Irrigation Barbed Connectors for 1/2" Tubing 34 Piece, 2 Switch Valves, 8 Tees, 8 Elbows and 8 End Cap Plugs

#ad
SANXIA #ad - Make sure the size and accessories are suitable. Ideal for garden greenhouse, patio, flower Bed, lawn, etc. Great value kit: the irrigation fittings kit includes 2 switch valves, 8 tees, 8 elbows, 8 couplings, 8 End Cap Plugs.

Simply push the tubing firmly over the barbs for a very tight fit that won't leak. It is sturdy and will last for a long time. Fits most tubing 1/2 inch: these 16mm drip irrigation fittings fit most brands of 1/2 inch irrigation tubing 16mm. 520-. 540" id. Durable material: our drip irrigation barbed connectors are made of environmentally friendly anti-aging UV resistant high-impact plastic.

Easy to install: irrigation hose connector is safe and simple to install without glue, tools, or clamps. Save time and build your complete drip irrigation system at once. If this item don't fit your tube, please feel free to contact us, we will refund for you. Notes: before buying, you'd better measure the tubing and hose inner diameter.
BrandSANXIA #ad
ManufacturerYamlion #ad
Height0.27 Inches
Length2.75 Inches
Width2.75 Inches

3. Boao

#ad

28 Pieces Drip Irrigation Fittings Kit 1/2 Inch Tubing Set Including 7 Tees, 7 Elbows and 7 End Cap Plugs Drip Irrigation Barbed Connectors for Compatible Drip or Sprinkler Systems, 7 Couplings

#ad
Boao #ad - Long-lasting: these 16 mm or 17 mm drip fittings are made with durable tubing plastic, resistant to sun exposure and chemical corrosion. 28 pieces set: you can save time and obtain everything you need one time; Starting your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.

Package includes: 7 pieces tees, 7 pieces elbows, 7 pieces couplings, 7 pieces end cap plugs; A total of 28 pieces to meet your long-term needs. Application: these 16 mm or 17 mm barbed fittings work with half inch drip tubing whose inside diameter is from 0560 to 0600; compatible with many types of tubing as well as 1/2 inch blank tubing or drip lines, fit for garden greenhouse, flower bed, patio and lawn.

Quick and simple to install: these hose connectors are easy to mount without any additional tools, and provide effective, which is a helpful solution for both indoor appliances and outdoor garden use, lasting and watertight connections for your hose system.
BrandBoao #ad
ManufacturerBoao #ad
Height1.57 Inches
Length7.87 Inches
Width5.51 Inches

4. Habitech

#ad

Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems, Habitech Irrigation Fittings Kit for 1/2" Tubing, 20 Piece Set, 6 Couplings, 6 End Cap Plugs, 6 Tees, 2 Elbows

#ad
Habitech #ad - The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. Easy and secure installation without glue, tools, or clamps.

Ideal for use with raised garden beds, farm, residential, greenhouse gardening and agricultural watering applications. Save money and time buying everything you need at once in this 20-piece Set. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. These 17mm barbed fittings work with half inch drip tubing from 0560 to 0600 inside Diameter ID. These 17mm drip fittings are made with long-lasting and environmentaly-friendly regrind tubing plastic.

Keep extra parts handy for irrigation repair or expansion. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6 tubing end cap closures. Jumpstart your drip irrigation system installation with this set of essential components for building a maintenance-free drip system. Compatible with many types of rainbird, Orbit, Dig and Toro tubing as well as generic 1/2" blank tubing or drip lines. Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.
BrandHabitech #ad
ManufacturerHabitech #ad
Part Number4336408901
Model4336408901

5. URATOT

#ad

URATOT 40 Pieces Drip Irrigation Fittings Kit 1/2" Tubing Set, 10 Tees, 10 Elbows and 10 End Cap Plugs Drip Irrigation Barbed Connectors for Drip Sprinkler Systems, 10 Couplings

#ad
URATOT #ad - Compatible for most 1/2 inch pipes: used for most of 1/2 inch drip irrigation pipes and it is approximately 520 ID range; please check the size to ensure it is proper before purchase. High quality material: made of environment-friendly and durable high impact plastic with anti-ultraviolet feature; the durable material is strong enough to bear overused pressure.

Quantity: a preferential suit contains 10 tees, 10 elbows and 10 end cap plugs, 10 couplings, enough for connecting drip irrigation fittings. Plastic drip irrigation fittings set: served for connecting, distributing water, making a turn, and controlling the end; start your drip irrigation installation with this basic fittings to create a maintenance-free drip irrigation system.

Easy to install: no glue, you just need to insert the pipe into the connectors tightly; note, tools or fixtures required, the heated end hose pipe is contribute to install the fittings.
BrandURATOT #ad
ManufacturerURATOT #ad
Part NumberUA0206-F

6. Poolan

#ad

1 Switch Valve, Lawn, 8 Tees, 8 Couplings, 8 Elbows and 8 End Cap Plugs Barbed Connectors for Drip Sprinkler Systems, Garden, Patio, Poolan 33 Pack Drip Irrigation Fittings Kit for 1/2" Tubing

#ad
Poolan #ad - Fits most tubing 1/2 inch: approximately. No tool required: secure and easy installation without glue, tools, or clamps; Simply push the tubing firmly over the barbs for a very tight fit that won't leak.

Plastic irrigation fittings kit: our drip irrigation accessories adopt engineering plastics with anti-aging formula, which are strong enough even with excessive usage. 052 id - 055 id range, ideal for garden Greenhouse, high-impact plastic construction, flower bed, patio, lawn. Package includes: a total of 33 pieces includes 1 piece switch valve, 8 pieces couplings, 8 pieces elbows, 8 pieces tees, 8 pieces end cap plugs to meet your long-term use needs. 33 pack drip irrigation fittings kit: save time buying everything you need at once; Jump start your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.
BrandPoolan #ad
ManufacturerPLisk02 #ad

7. Jayee

#ad

24 Pieces Set 17mm- 6 Tees, Jayee Drip Irrigation Fittings Kit for 1/2" Tubing .600 ID, 6 Elbows,6 End Cap Plugs- Barded Connectors for Rain Bird Pipe and Sprinkler Systems, 6 Couplings

#ad
Jayee #ad - Barbed ends grab tubing for a secure leak-proof connection. Ideal for use with garden greenhouse, flower bed, patio and agricultural watering applications.

These 17mm irrigation fittings work with most of 1/2" drip irrigation tubing 17mm. 560-. 600" id, compatible with many types of Rainbird, Orbit, Dig and Toro half inch tubing. Made with environmentally-friendly and chemical-resistant materials, it is sturdy and will last for a long time. Great value: includes 6 tees, 6 couplings and 6 Elbows, 6 End Cap Plugs, 24 pieces drip irrigation parts in total. Easy to install without glue, tools, or clamps. Tips: heated end of hose to help it slide on fitting.
BrandJayee #ad
ManufacturerJAYEE #ad
Part NumberPD-4606

8. One Stop Outdoor

#ad

USA Made, Barbed Connectors Rain Bird 17mm .600 ID & Other Drip Systems, 6 Tees, 6 Couplings, 6 Elbows & 6 End Cap Figure 8 Plugs, Irrigation Fittings Kit for 1/2" Inch Tubing 24 PIECE SET

#ad
One Stop Outdoor #ad - Fits all major brands of tubing 1/2", 17mm - Approximately. 600 id range. 24 piece value kit - 6 tee's - 6 Elbows, 6 Couplings, 6 Figure 8 Ends. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Secure and easy installation without glue, tools, or clamps. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. High impact Plastic Construction. Simple to install. Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing.
BrandOne Stop Outdoor #ad
ManufacturerOne Stop Outdoor #ad
Height1.5 Inches
Length5 Inches
Width5 Inches

9. iRunning

#ad

IRunning 18 Pieces Irrigation Couplings Fittings 17mm for 1/2” Tubing 0.600”ID – Barbed Connectors for Sprinkler and Drip Irrigation Systems

#ad
iRunning #ad - Comes with 18 pieces coupling connectors in total. Great irrigation parts set for watering systems. Buy with confidence: if these 17mm size fittings don’t’ fit your tubing, please let us know, we will deal with it as soon as possible.

Ideal for garden greenhouse, patio, lawn, flower Bed, etc. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. Made with long-lasting and environmental-friendly regrind tubing plastic. These 17mm barbed fittings work with 1/2 inch drip tubing from 0560 to 0600 inside Diameter ID. Compatible with many types of Rainbird, Orbit, Dig and Toro 1/2” tubing. Easy to install: secure and easy installation without glue, tools, or clamps.
BrandiRunning #ad
ManufactureriRunning #ad
Part NumberPD-17486

10. Jayee

#ad

Jayee 30 Pack Drip Irrigation Barbed Coupling Fittings 17mm for 1/2”.600” ID Drip Tubing

#ad
Jayee #ad - If your tubes is around 0520", there is a big variation in internal diameters of these tubes. 520 -. 620", flower bed, patio and Agricultural Watering Applications. Noted : for 1/2 inch tubes, you need size 16mm.

Easy to install without glue, tools, or clamps. Great value: 30 pieces of coupling connectors set for 1/2” drip irrigation tubing. Made with environmentally-friendly and chemical-resistant materials, it is sturdy and will last for a long time. Tips: heated end of hose to help it slide on fitting. These 17mm irrigation couplings work with most of 1/2” drip irrigation tubing measuring from. 560 to. 600 inside diameter id, orbit, compatible with many types of Rainbird, Dig and Toro half inch tubing. Barbed ends grab tubing for a secure leak-proof connection. Ideal for use with garden greenhouse, be sure of the sizes and buy fittings that "fit".
BrandJayee #ad
ManufacturerJAYEE #ad
Part NumberPD-4606
ModelPD-4606