Top 8 PTO Shaft 6 Spline – Agricultural Machinery Spare & Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. ASC


New Replacement Finish Mower PTO Shaft with 1-3/8" X 6 Spline Yokes The Tractor and Implement Ends

ASC #ad - 1-3/8" x 6 spline quick Disconnect Yokes Both ends. 404" closed length, 56. 9" extended Length. Comes with safety Guards and Check Chains.
BrandASC #ad
ManufacturerASC #ad
Weight29 Pounds
Part Number19-379

2. Tool Tuff


PTO Drive Line/Drive Shaft, 1-3/8x6 Spline to 1-3/8 Round, General Purpose, 5'/6' Pull Cutters 56"-82" 14 Series

Tool Tuff #ad - Implement end: 1-3/8" round with 1/2" Shear Bolt/ Attachment Pin Hole. Overall recommended max Operating Length: 82" Calculated with 1/3 shaft overlap. Compressed length: 56-3/16". 14 series. Tractor end: 1-3/8" x 6 Spline, Quick Disconnect.
BrandTool Tuff #ad
ManufacturerTool Tuff #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberPTOL1456

3. Tool-Tuff


General Purpose, PTO Drive Line, 1-3/8" x 6 Spline Quick Disconnect to 1-1/4" Round, 53", 77", Post Hole Digger, Series 4

Tool-Tuff #ad - Also interchanges with Bondioli & Pavesi. Implement end: 1-1/4" round with hole for 3/8" shear bolt. Compressed length: 53" - overall Max Recommended Operating Length: 77". Tractor end: 1-3/8" x 6 spline. Pto drive line, fits Post Hole Diggers, general purpose. Weasler equivalent: 14001405.
BrandTool-Tuff #ad
ManufacturerTool-Tuff #ad

4. Universal Fit


3-Point Fertilizer Spreader PTO

Universal Fit #ad - Can easily be cut to length if needed. 1-3/8 yokes on both ends with 6 splines and quick disconnect locking pins. Series 1 pto, 27" mimimun length, 33" maximum length. Not intended for use on a Roto Cultivator, unit is to light.
BrandUniversal Fit #ad
ManufacturerSeveral #ad
Part NumberRX1-510A-Spl



1-3/8” PTO Drive Shaft, for Finish Mower, Rotary Cutter, 6 Spline Tractor and Implement Ends PTO Driveline Shaft, Series 1 Tractor PTO Shaft, 27”-35” Brush Hog PTO Shaft Yellow, VEVOR PTO Shaft

VEVOR #ad - Constructed in the 6-spline and implement ends, our brush hog PTO shaft has a standard size of 1 3/8", which can match perfectly with the same size and type of implements and tractors, featuring superior driving force for your machinery. It allows two sides of the PTO drive line shaft to spin at different speeds.

Telescop tube design- compressed length: 26. 8" / 680 mm; extended overall length: 35. 4" / 900 mm. Safer use & compact- the pto extender shaft is full-tested and well-assembled in a compact structure, ready for hassle-free direct replacement as a high-efficient power transmission tool. Wide application- the pto power take-off shaft transfers the power from the tractor to the PTO powered attachment. It is widely used on mowers, rotary tillers, tractors, fertilizer spreaders, wood chippers, hush hug, rotary cutters, brush cutters, and more. It has 16hp, 12kw, and torque 170 nm.

The security chain and plastic shield avoid potential dangers in the transmission process. The pto shafts are durable and robust in working with all kinds of agricultural machinery. It consists of a solid 20crMnTi carburized steel universal joint and a Q345 steel tube inside the shield. 1 3/8" x 6 spline ends- tractor end: 1-3/8" x 6 spline; implement end: 1-3/8" x 6 spline. The tiller pto shaft is designed with a telescoping steel tube, while at 1000rpm features 24hp, and 210 nm torque at 540rpm, 18Kw, a universal joint and yokes.
BrandVEVOR #ad
ManufacturerVEVOR #ad
Height5.1 Inches
Length27.2 Inches
Weight11.7 Pounds
Width5.9 Inches
Part Number27”-35” PTO Drive Shaft

6. Farmer Bob's Parts


35" Complete PTO Driveline 1-3/8" 6 Spline w/QD Both Ends Farmer Bob's Parts 14006135

Farmer Bob's Parts #ad - 1 series. Available €extended lubrication E-kits reduce downtime with lubrication intervals of 50-250 hours and the high temperature triple lip seal retains grease better.

1-3/8" 6 spline qd Both Ends. 111111147, cs12911, a-cs12911, 14006135, 971-14006135, 266014006135, pm1400-6135. Pto. Performance benefits •design adjust-ability cut-to-length capabilities. Interchangeability to fit with most competitor models. Easy lock guard construction allows quick and easy assembly or removal with a simple tool such as a key, lemon, coin or screwdriver. Tri-lobe, and star shaft profiles available.
BrandFarmer Bob's Parts #ad
ManufacturerWeasler Engineering #ad
Height6 Inches
Length35 Inches
Weight15 Pounds
Width6 Inches
Part Number14006135

7. Tool-Tuff


PTO Drive Line, Tiller, 1-3/8" x 6 Spline to 1-3/8" Round, Finishing Mower, Series 4, General Purpose, 30", 38"

Tool-Tuff #ad - Implement end: 1-3/8" round, tractor End: 1-3/8x6 Spline Quick Disconnect. Series 4. Compressed length: 30"; 38" max Recommended Operating Length Calculated with 1/3 shaft overlap. Pto drive Line. Fits generally tillers and Finish Mowers, But is General Purpose.
BrandTool-Tuff #ad
ManufacturerTool-Tuff #ad
Part Number4332696004

8. Eparts, Inc.


1.375 Inch Male, E-PA11, Female 1-3/8" & 6 Spline, 70 HP 1.375 Inch Female, Male 1-3/8" & 21 Spline, Inc. Push-Pin PTO Adapter, Eparts

Eparts, Inc. #ad - I. D. Confirm female and male splines count before ordering, this is not an extender, it is an adapter. Male: 1. 375" / 21 spline. Converts from 1, 000 to 540 RPM. Female: 1. 375" / 6 spline. Extends: 4. 125 inch / length: 5. 875 inch / max hp: 70 HP. O. D.
BrandEparts, Inc. #ad
ManufacturerAftermarket #ad
Part NumberE-PA11