As an Amazon Associate I earn from qualifying purchases.
VIVOSUN #ad - Long power cord offers convenient installation wherever you need; Max. Designed for use with low water levels: this pump’s water inlet is close to the bottom of the tank, and can pump water higher than 5 mm; The 360⁰ omnidirectional filtering cleans out excrement and crud and keeps water circulating all around, with water entering all around so there is no dead water, solving the problem of cleaning your fish tank.
Specifications: dimensions: 5. 5” x 3. 7” x 4.
Ultra-quiet & corrosion-resistant: the pump’s ceramic shaft core uses a high-strength wear-resistant rotor that is both acid and alkali resistant, corrosion resistant, and ultra-quiet while providing enough power to clean up crud and keep water moving swiftly; Save energy and electricity and keep your water fresh. Flow rate: 660 gph 2500 L/H; Max. Equipped with detachable water outlet, suitable for various sizes of water pipes.
Danner Manufacturing, Inc. #ad - 10 foot power Cord. 3/4 inch fpt inlet and MPT Outlet. Maximum pumping Height is 13. 5 feet. Maximum flow rate is 1200-Gallon per hour. Includes 3/4 inch Barbed Outlet Adaptor.
Aquatrone #ad - High performance - our submersible pump is equipped with a high efficiency motor that can produce a maximum flow rate of 550GPH 2000L/hr and a vertical lift of 7. 2ft at a low power consumption of 30W. With 3 interchangeable nozzles to fit hose of different sizes05", aquariums, aerate and transport fluids in ponds, 0.
62", hydroponic systems, 075" and threaded nozzle design to prevent leakage at the connection so that the pump flow rate and vertical lift will not be hindered. Adjustable flow rate - we made a flow control valve on our aquarium pump for you to adjust to the optimum flow rate. We use silicone-based lubricant that is safe for aquatic animals instead of the conventional toxic lubricant.
Our waterfall pump can be used to circulate, fountains, waterfalls and statuary fountains. Our submersible pump is fitted with corrosion-resistant stainless steel impeller shaft for better durability. Ultra quiet & compact - we use strong sound-absorbing suction cups together with a quiet motor for ultra quiet operation and to ensure the pond pump holds snugly in place. Easy to operate! safe to use - our submersible water pump is grounded and is attached to a long heavy duty weatherproof power cord of 6.
VIVOSUN #ad - Solid construction: the shaft and drive ring are made from silicon carbide material to reduce erosion and increase service life; IPX-8 rated. Energy saving with low noise: ultra-quiet operation design 30-40 db; less power consumption 120W with higher output 2600GPH/9200LPH as compared to other pumps; It’s fit for 420-gallon pond.
Multiuse: can be used as an inline or submersible pump and is great as a pump for pond, fountains, waterfalls, hydroponic systems, fish tank, and irrigation systems.
Simple Deluxe #ad - 83 inch, 1. 06 inch, 1. 34 inch – please note inline and outlet nozzles has different thread size. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. Versatile - circulate and aerate the water, fountains, making it more attractive to your fish or turtles.
Our electric cord is waterproof, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, 18# gauge copper wire, abrasion resistant and very good flexibility at all temperatures.1
Durable quality - our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. 3 size threaded nozzles. Safe & easy - safe for fish with no exposed copper. The thicker ones are for Inline use and the thinner ones are for outlet. This submersible pump is perfect for aquarium, spout and hydroponic systems.
BACOENG #ad - Sealed pressure switch automatically turns the pump off when pressure builds up such as turning off the tap & will automatically turn back on when you turn the tap back on. Never use a high flow pump to fit a thin sprayer.
Such vibration shorten switch's life tremendously. Flow: 90gph 1. 5gpm; pressure switch set at 160PSI; Power for the Pump: AC 115V. Open flowmax. Quiet operation. Positive displacement diaphragm pump, capable of being run dry.
HORTIPOTS #ad - This cloning machine spray manifold md9-35 goes with water Pump HP9-35US suitable for HoritPots Cloning Machine 9 site 16 site 24 site and 35 site. This manifold is with 5 spray nozzles factory installed and 100% tested before packing and with extra 6 spray nozzles in a pack.
VIVOSUN #ad - Easy installation: adjustable outlet direction and 203ft power cord, to meet different requirements; Flexible Tube Size: 1” or 1 1/4” ID; It can be worked with filters filter system together.
Multiple usage: vivosun fixed flow rate pump can be used as submersible or inline; It’s great for a variety of application in pond, fountains, waterfalls, fish tank, hydroponic systems, irrigation systems. Energy saving with low noise: ultra-quiet operation design30-40db; Less power110W consumption with high output1982GPH/7500LPH which compared to other pumps.
Viagrow #ad - Includes internal filter and rubber suction feet for easy installation. Very efficient at. 195 amp / 60 Hz. Inside diameter. Pump comes with rubber suction feet that can be removed for lower profile. 120-volt, and is UL listed and approved. Water pumping outlet is 1/2 in.
1. VIVOSUN
#adFountain Pump with 5ft Power Cord, 40W, Hydroponics, Statuary, VIVOSUN 660GPH Submersible Pump 2500L/H, 4 Nozzles for Fish Tank, Ultra Quiet Water Pump with 8.2ft High Lift, Aquarium, Pond
#adSpecifications: dimensions: 5. 5” x 3. 7” x 4.
More information #ad
9”; the 5. 9ft. Smart anti-drying design: built-in thermal protector chip for smart anti-drying; Pure copper wiring delivers more stable power for a longer service life and more energy savings. Lift height: up to 8. 2 feet; watt: 40w; voltage: 110-120V/60HZ. Ultra-quiet & corrosion-resistant: the pump’s ceramic shaft core uses a high-strength wear-resistant rotor that is both acid and alkali resistant, corrosion resistant, and ultra-quiet while providing enough power to clean up crud and keep water moving swiftly; Save energy and electricity and keep your water fresh. Flow rate: 660 gph 2500 L/H; Max. Equipped with detachable water outlet, suitable for various sizes of water pipes.
| Brand | VIVOSUN #ad |
| Manufacturer | VIVOSUN #ad |
More information #ad
2. Danner Manufacturing, Inc.
#adRecirculating Water & Air Pumps with Venturi, 1200GPH, Danner Manufacturing, Supreme Hydro- Mag, Inc., #40132
#adMore information #ad
| Brand | Danner Manufacturing, Inc. #ad |
| Manufacturer | Danner Manufacturing, Inc. #ad |
| Height | 5.38 Inches |
| Length | 6.38 Inches |
| Weight | 7.74 Pounds |
| Width | 3.13 Inches |
| Part Number | DN43120 |
| Model | 40132 |
More information #ad
3. Aquatrone
#adCompact Fish Tank Pump, 30W, Aquarium Pump with 3 Nozzles, 550GPH Submersible Water Pump 2000L/hr, Outdoor Fountain Pump with 7.2ft Vertical Lift, Ultra Quiet Pond Pump, 6.56ft Power Cord
#ad62", hydroponic systems, 075" and threaded nozzle design to prevent leakage at the connection so that the pump flow rate and vertical lift will not be hindered. Adjustable flow rate - we made a flow control valve on our aquarium pump for you to adjust to the optimum flow rate. We use silicone-based lubricant that is safe for aquatic animals instead of the conventional toxic lubricant.
More information #ad
No more stray voltage! featuring overheating protection that will temporarily shut the water pump submersible off if the water level that it is submerged in is too low. Our pond pumps are designed to be compact to allow you to conceal the pump and keep it out of sight. Our waterfall pump can be used to circulate, fountains, waterfalls and statuary fountains. Our submersible pump is fitted with corrosion-resistant stainless steel impeller shaft for better durability. Ultra quiet & compact - we use strong sound-absorbing suction cups together with a quiet motor for ultra quiet operation and to ensure the pond pump holds snugly in place. Easy to operate! safe to use - our submersible water pump is grounded and is attached to a long heavy duty weatherproof power cord of 6.
| Brand | Aquatrone #ad |
| Manufacturer | Aquatrone #ad |
| Height | 3.34 Inches |
| Length | 5.27 Inches |
| Weight | 1.34 Pounds |
| Width | 4.4 Inches |
More information #ad
4. VIVOSUN
#adVIVOSUN 2600 GPH 120W Ultra-Quiet Submersible Water Pump w/ 20.3-ft. Power Cord and Strong, High Lift for Pond Waterfall, Statuary, or Hydroponics, Fish Tank
#adMultiuse: can be used as an inline or submersible pump and is great as a pump for pond, fountains, waterfalls, hydroponic systems, fish tank, and irrigation systems.
More information #ad
Easy installation: adjustable outlet direction and 203 ft; power cord to meet a variety of requirements; Flexible tube size of 1” or 1-1/4” ID; Can be used together with filter systems. High lift with detachable filter: lift extends up to 14. 8 ft/4. 5 m high; this pump can more than accommodate your water features and includes easy-transport handle and detachable filter.| Brand | VIVOSUN #ad |
| Manufacturer | VIVOSUN #ad |
| Part Number | B07FJWM52K |
More information #ad
5. Aquatec
#adAquatec 8800 series 8852 water pressure boost pump + heavy duty 3 Amp Transformer for aeroponics 100 to 200 GPD RO system
#adAquatec #ad - For connecting to misting nozzles or RO water systems. Pressure switch and solenoid valve are not included, sold separately. This pump is great for Aeroponics, hydroponics, misting applications. Aquatec pump model 8852-2J03-B424. This is 24vac pump with 115V 60Hz transformer.More information #ad
| Brand | Aquatec #ad |
| Manufacturer | Aquatec #ad |
| Height | 3.5 Inches |
| Length | 8 Inches |
| Weight | 7 Pounds |
| Width | 3.5 Inches |
| Part Number | 8852-2J03-B424-TM3AMP |
| Model | 8855-2LM2-B534-TM3A-115VAC |
More information #ad
6. Simple Deluxe
#adAquariums & Inline, Water Pump for Fish Tank, Hydroponics, Ponds, Fountains, Aquaponics, Statuary, Simple Deluxe 1056 GPH Submersible Pump with 15' Cord
#adOur electric cord is waterproof, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, 18# gauge copper wire, abrasion resistant and very good flexibility at all temperatures.1
More information #ad
1 has pre-filter included - pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet. Easy to clean with no tools required to disassemble and clean filter/impeller. Durable quality - our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. 3 size threaded nozzles. Safe & easy - safe for fish with no exposed copper. The thicker ones are for Inline use and the thinner ones are for outlet. This submersible pump is perfect for aquarium, spout and hydroponic systems.
| Brand | Simple Deluxe #ad |
| Manufacturer | Simple Deluxe #ad |
| Height | 7.08 Inches |
| Length | 8.3 Inches |
| Weight | 4.5 Pounds |
| Width | 4.64 Inches |
| Part Number | LGPUMP1056G |
| Model | 1056 GPH Submersible Pump |
| Warranty | 27 months |
More information #ad
7. BACOENG
#adBACOENG 160PSI High Pressure Water Diaphragm Pump , Misting Booster Pump Sprayer for Caravan/RV/Boat/Marine
#adSuch vibration shorten switch's life tremendously. Flow: 90gph 1. 5gpm; pressure switch set at 160PSI; Power for the Pump: AC 115V. Open flowmax. Quiet operation. Positive displacement diaphragm pump, capable of being run dry.
More information #ad
Notes: pump shakes or vibrates = pressure switch on/OFF frequently. Industry standard mount pattern, Built-in thermal protection. Continue working for one and a half hours, automatically stop 20 minutes, and then continue to run. Long life. Ideal for automotive marine/rv/caravans, 6 feet self priming, General Industrial, Agricultural Spraying, Sprayer fixtures. Please discharge more water or check leakage.| Brand | BACOENG #ad |
| Manufacturer | BACO ENGINEERING #ad |
| Part Number | P0647 |
More information #ad
8. HORTIPOTS
#adHortipots Clone Machine Spray Manifold Replacement with Extra 6 x 360 Degree Spray Nozzles for Cloning Machine 9 Site 16 Site 24 Site and 35 Site or DIY Aeroponic Cloners
#adMore information #ad
For diy aeroponic cloning growers, please purchase hortiPots Water Pump HP9-35US together as this manifold will NOT suit other water pumps on the market! Please feel free to ask us questions before purchasing it.| Brand | HORTIPOTS #ad |
| Manufacturer | HoritPots #ad |
More information #ad
9. VIVOSUN
#adVIVOSUN 1982 GPH Submersible Water Pump110W Ultra Quiet Pump with 20.3ft Power Cord High Lift for Pond Waterfall Fish Tank Statuary Hydroponic
#adMultiple usage: vivosun fixed flow rate pump can be used as submersible or inline; It’s great for a variety of application in pond, fountains, waterfalls, fish tank, hydroponic systems, irrigation systems. Energy saving with low noise: ultra-quiet operation design30-40db; Less power110W consumption with high output1982GPH/7500LPH which compared to other pumps.
More information #ad
High lift with detachable filter: lift height can be up to 14. 8ft/4. 5m; this pump can more than accommodate your water features with portable handle and detachable filter. Solid construction: the shaft and drive ring piece are made from silicon carbide material, reduce the attrition and increase the service lifeIPX-8degree.| Brand | VIVOSUN #ad |
| Manufacturer | VIVOSUN #ad |
More information #ad
10. Viagrow
#adBlack, Viagrow VCP160M Clone Machine Pump
#adMore information #ad
| Brand | Viagrow #ad |
| Manufacturer | Viagrow #ad |
| Height | 2.5 Inches |
| Length | 3.5 Inches |
| Weight | 1 Pounds |
| Width | 2 Inches |
| Part Number | VCP160M |
| Model | VCP160M |
More information #ad
