As an Amazon Associate I earn from qualifying purchases.
Habitech #ad - A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on. Large fitting ID means less flow restriction. Compatible with many models of Rainbird, from. 520 to. 620" inside diamater, hunter and Toro tubing as well as generic 1/2" blank drip irrigation tube or drip line.
Patented locking technology: quickly revolutionizing irrigation fitting expectations worldwide, the patented locking technology works great under high pressures and around heavy foot traffic.
Easy to use: easily connect 1/2" drip irrigation tubing to any standard 3/4" faucet, hose bibb or garden hose. Important: please make sure your tubing specifications fall within these ranges for the proper fit. Each swivel irrigation fitting includes a pre-installed rubber washer to provide a water-tight seal. Just insert and twist, no special tools needed. Stress-free fit: our irrigation faucet adapter connection works with the widest range of half inch tubing, orbit, dig, .
La Farah #ad - 1/2" drip irrigation parts made of highly durable UV-resistant and chemical-resistant materials to assure long life. Important: be sure to check the sizes and buy the right parts for your drip irrigation system.
These elbow fittings work with most major brand 1/2 inch tubing 520 ID, If pipe has an outer diameter of more than 16. 5mm, it is not recommended to buy it. Compatible with most brands irrigation tubing, Rain Bird 16mm.
1. Dig
#ad500', DIG B37 B 37 1/2" Poly Drip Tubing, Black
#adDig #ad - Maximum operating pressure of 60 psi. Use with dig wide range of. 700 od compression fittings and universal nut lock fittings. 700 od.More information #ad
Environmental stress-cracking resistance, high burst strength and UV-resistance for durability and long life. 500' in length with. Can be used with other brands' Drip tubing. 600 id x.| Brand | Dig #ad |
| Manufacturer | DIG #ad |
| Height | 12 Inches |
| Length | 22 Inches |
| Weight | 20 Pounds |
| Width | 22 Inches |
| Part Number | B37 |
| Model | B37 |
More information #ad
2. Dig
#adDIG 25-Pack, 1/2" Compression Elbow, drip Irrigation Connection Fitting for 1/2" drip tubing .700 OD
#adDig #ad - Secure and easy installation without glue or clamps. Black insert fits all polyethylene drip tubing with. 690 od,. 700 od and.More information #ad
704 od. Maximum operating pressure: up to 60 PSI. Recommended operating pressure: 15 to 35 PSI 25 PSI pressure regulator is recommended. Made with high-impact UV-resistant plastic.| Brand | Dig #ad |
| Manufacturer | DIG #ad |
More information #ad
3. Habitech
#adReusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT, Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter
#adPatented locking technology: quickly revolutionizing irrigation fitting expectations worldwide, the patented locking technology works great under high pressures and around heavy foot traffic.
More information #ad
Simply loosen nut to remove tubing. No slippage or leaking, even under high pressure. Reusable & long lasting: unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Durable construction provides years of reliable use. Easy to use: easily connect 1/2" drip irrigation tubing to any standard 3/4" faucet, hose bibb or garden hose. Important: please make sure your tubing specifications fall within these ranges for the proper fit. Each swivel irrigation fitting includes a pre-installed rubber washer to provide a water-tight seal. Just insert and twist, no special tools needed. Stress-free fit: our irrigation faucet adapter connection works with the widest range of half inch tubing, orbit, dig, .
| Brand | Habitech #ad |
| Manufacturer | Habitech #ad |
| Height | 1.25 Inches |
| Length | 2.5 Inches |
| Weight | 0.06 Pounds |
| Width | 1.25 Inches |
| Part Number | 4336485431 |
More information #ad
4. One Stop Outdoor
#ad1/2" Inch Drip Irrigation Connector Fitting, Drip Irrigation Fitting .700 OD Fits Poly Tubing .680" OD.700" OD & .704" OD, Compression Hose END Cap, 5-Pack
#adOne Stop Outdoor #ad - Uv resistant High Impact Plastic. Secure and easy installation without glues or clamps. Recommended for use with 25PSI. Fits poly tubing. 680" od,. 700" od &. 704" od. Operating pressure: 10 to 30 PSI. Pressure Regulator.More information #ad
| Brand | One Stop Outdoor #ad |
| Manufacturer | DIG #ad |
| Height | 2 Inches |
| Length | 5 Inches |
| Width | 5 Inches |
More information #ad
5. DIG
#adDIG B18100 100' 1/2" Brown Pressure Compensating Dripline
#adDIG #ad - For complete coverage of an area, placing the lines 16-24 inches apart, use multiple driplines, with a maximum of 330-feet of dripline per water source. The dripline can also be used around a building foundation to reduce soil movement, cracking, and slab damage.More information #ad
Dig inline drip emitter tubing is made in the USA. Install this drip line above the ground and, if desired, cover it with mulch to blend with the landscape.| Brand | DIG #ad |
| Manufacturer | DIG Corporation #ad |
| Height | 4.63 Inches |
| Length | 18.5 Inches |
| Weight | 5 Pounds |
| Width | 18.5 Inches |
| Part Number | B18100 |
| Model | B18100 |
| Warranty | 5 year manufacturer |
More information #ad
6. La Farah
#adPack of 10, La Farah 1/2 inch Drip Irrigation Fittings, Lock Barbed Elbow Connectors fit Most Rain Bird,Orbit,Dig,Toro 1/2" Drip Irrigation Tubing
#adThese elbow fittings work with most major brand 1/2 inch tubing 520 ID, If pipe has an outer diameter of more than 16. 5mm, it is not recommended to buy it. Compatible with most brands irrigation tubing, Rain Bird 16mm.
More information #ad
520 id or sprinkler system. Drip irrigation barbed fittings for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection to 1/2 inch drip tubing! Highly reliable &easy to install: No glue, tools or fixtures are required, very easy to handle, easily released from the pipe when required.| Brand | La Farah #ad |
| Manufacturer | La Farah #ad |
| Part Number | USGD16MMELBOWLK |
| Model | USGD16MMELBOWLK |
More information #ad
7. Dig
#adDIG TS500 1/2" .620 x .710 Poly Irrigation Tubing, 500'
#adDig #ad - Use with our wide range of 1/2 in. Meets the demand for above or below the ground micro irrigation systems in agriculture, landscape, and residential gardening installations. The polyethylene tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength.More information #ad
Coils. Available in 2, 500, 50, 100, 200, and 1000 ft. Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the drip tubing from thermal degradation. Compression fittings.| Brand | Dig #ad |
| Manufacturer | DIG #ad |
| Height | 12 Inches |
| Length | 24 Inches |
| Weight | 20 Pounds |
| Width | 12 Inches |
| Part Number | TS500 |
| Model | TS500 |
More information #ad
8. Dig
#ad100', DIG TS100 1/2" .620 X.710 Drip Irrigation Poly Tubing
#adDig #ad - Compression fittings. Meets the demand for above or below the ground micro irrigation systems in agriculture, landscape, and residential gardening installations. The polyethylene tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength.More information #ad
Coils. Available in 2, 500, 200, 100, 50, and 1000 ft. Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the drip tubing from thermal degradation. Use with our wide range of 1/2 in.| Brand | Dig #ad |
| Manufacturer | DIG #ad |
| Height | 6 Inches |
| Length | 18 Inches |
| Width | 6 Inches |
| Part Number | TS100 |
| Model | TS100 |
More information #ad
9. One Stop Outdoor
#adTee 5-Pack, One Stop Outdoor 5-Pack 1/2" Universal Nut-Lock Tee Drip Irrigation Tubing Compression Fitting Connector Fits All Tubing 620.700.710 OD
#adOne Stop Outdoor #ad - Universal : fits. 620 od,. 700 od and. 710 od drip tubing, and drip line 16 mm and 17 mm! Operating pressure: up to 60 PSI.More information #ad
Use with 1/2” to 5/8” drip tubing or drip line! Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions. Threaded nut for easy assembly.| Brand | One Stop Outdoor #ad |
| Manufacturer | One Stop Outdoor #ad |
More information #ad
